Agilent Technologies N9010A - Manual (Page 133)

Chapter 11 133
Option EXM - External Mixing
Other External Mixing Specifications
Other External Mixing Specifications
Description Specifications Supplemental Information
Connection Port EXT MIXER
Connector SMA, female
Impedance 50
Ω (nominal) at IF and LO
frequencies
Functions Triplexed for Mixer Bias,
IF Input and LO output
Mixer Bias
Bias Current Short circuit current
Range ±10 mA
Resolution 10
μA
Accuracy ±20
μA (nominal)
Output impedance 477
Ω (nominal)
Bias Voltage Open circuit
Range ±3.7 V (nominal)
IF Input
Maximum Safe Level +7 dBm
Center Frequency
Standard (or Option B25
a
)
a. Option B25 and B40 are only available in "I/Q Analyzer" mode.
322.5 MHz
Option B40
a
250.0 MHz
Bandwidth Supports all optional IFs
ADC Clipping Level
b
b. These specifications apply at the IF input port. The on-screen and mixer-input levels scale with the con-
version loss and corrections values.
–14.5 ±1.5 dBm (nominal)
1 dB Gain Compression
b
0 dBm (nominal)
Gain Accuracy
c
20 to 30 °C Full Range
Standard (or Option B25
a
) ±1.2 dB ±2.5 dB Swept and narrowband
Option B40
a
±1.2 dB (nominal)
IF Frequency Response RMS (nominal)
CF Width
322.5 MHz ±5 MHz 0.05 dB
322.5 MHz ±12.5 MHz 0.07 dB
250 MHz ±20 MHz 0.15 dB
Noise Figure
(322.5 MHz, swept operation)
9 dB (nominal)
VSWR 1.3:1 (nominal)