Specifications affected by analysis bandwidth – Agilent Technologies N9010A User Manual
Page 100
100
Chapter 5
Option B40 - 40 MHz Analysis Bandwidth
Specifications Affected by Analysis Bandwidth
Specifications Affected by Analysis Bandwidth
The specifications in this chapter apply when the 40 MHz path is in use. In IQ Analyzer, this will occur
when the IF Path is set to 40 MHz, whether by Auto selection (depending on Span) or manually.
Specification Name
Information
IF Frequency Response
See specifications in this chapter.
IF Phase Linearity
See specifications in this chapter.
Spurious Responses
There are three effects of the use of Option B40 on spurious
responses. Most of the warranted elements of the
still apply without changes, but the
revised-version of the table on
effect of Option B40, is shown in its place in this chapter. The
image responses part of that table have the same warranted
limits, but apply at different frequencies as shown in the table.
The "higher order RF spurs" line is slightly degraded. Also,
spurious-free dynamic range specifications are given in this
chapter, as well as IF Residuals.
Phase Noise
The performance of the analyzer will degrade by an unspecified
extent when using wideband analysis. This extent is not
substantial enough to justify statistical process control.
Absolute Amplitude Accuracy
Nominally 0.5 dB degradation from base instrument absolute
amplitude accuracy. (Refer to
Absolute Amplitude Accuracy on
Frequency Range Over Which
Specifications Apply
Specifications on this bandwidth only apply with center
frequencies of 30 MHz and higher.