Agilent Technologies N9010A - Manual (Page 140)

140 Chapter 13
Option P03, P07, P13, P26, P32 and P44 - Preamplifier
Specifications Affected by Preamp
Specifications Affected by Preamp
Specification Name Information
Nominal Dynamic Range vs.
Offset Frequency vs. RBW
The graphic from the core specifications does not apply with
Preamp On.
Measurement Range The measurement range depends on DANL.
See “Amplitude Accuracy and Range” on page 33 .
Gain Compression See specifications in this chapter.
Displayed Average Noise Level See specifications in this chapter.
Displayed Average Noise Level
with Option MPB for Option 532
or 544 Performance is nominally 3 dB worse than without Option MPB.
Frequency Response See specifications in this chapter.
Absolute Amplitude Accuracy See “Absolute Amplitude Accuracy” on page 37 of the core
specifications.
RF Input VSWR See plot in this chapter.
Display Scale Fidelity See “Display Scale Fidelity” on page 41 of the core specifications.
Then, adjust the mixer levels given downward by the preamp gain
given in this chapter.
Second Harmonic Distortion SHI with preamplifiers is not specified.
Third Order Intermodulation
Distortion See specifications in this chapter.
Other Input Related Spurious See “Spurious Responses” on page 48 of the core specifications.
Preamp performance is not warranted but is nominally the same as
non-preamp performance.
Dynamic Range See plot in this chapter.
Gain See “Preamp” specifications in this chapter.
Noise Figure See “Preamp” specifications in this chapter.