Agilent Technologies N9010A - Manual (Page 42)

42 Chapter 1
Agilent EXA Signal Analyzer
Amplitude Accuracy and Range
f. Slope error will nominally be well within the range of
±0.0009 × (P1 − P2). P1 and P2 are defined in
footnote e .
g. A small additional error is possible. In FFT sweeps, this error is possible for spans under 4.01 kHz. For
non-FFT measurements, it is possible for RBWs of 3.9 kHz or less. The error is well within the range of
±0.0021 × (P1 - P2) subject to a maximum of ±0.005 dB. (The maximum dominates for all but very
small differences.) P1 and P2 are defined in footnote
e .
Description Specifications Supplemental Information
Available Detectors Normal, Peak, Sample, Negative Peak,
Average Average detector works on RMS,
Voltage and Logarithmic scales