Agilent Technologies N9010A - Manual (Page 101)

Chapter 5 101
Option B40 - 40 MHz Analysis Bandwidth
Other Analysis Bandwidth Specifications
Other Analysis Bandwidth Specifications
Description Specifications Supplemental
Information
Spurious Responses
a
(see Band Overlaps on page 22 )
a. Preselector enabled for frequencies >3.6 GHz.
Preamp Off
b
b. The spurious response specifications only apply with the preamp turned off. When the preamp is turned
on, performance is nominally the same as long as the mixer level is interpreted to be: Mixer Level =
Input Level
− Input Attenuation − Preamp Gain
Residual Responses
c
c. Input terminated, 0 dB input attenuation.
−100 dBm (nominal)
Image Responses
d
Tuned Freq (f) Excitation Freq Response
10 MHz to 3.6 GHz f+10100 MHz –119 dBc (nominal)
10 MHz to 3.6 GHz f+500 MHz –121 dBc (nominal)
3.5 to 13.6 GHz f+500 MHz –89 dBc (nominal)
13.5 to 17.1 GHz f+500 MHz –83 dBc (nominal)
17.0 to 22 GHz f+500 MHz –82 dBc (nominal)
22 to 26.5 GHz f+500 MHz –79 dBc (nominal)
>26.5 GHz f+500 MHz –79 dBc (nominal)
Other Spurious Responses
Carrier Frequency
≤ 26.5 GHz
First RF Order
e
(f
≥ 10 MHz from carrier)
−10 dBm
–112 dBc (nominal)
Higher RF Order
f
f
≥ 10 MHz from carrier
−40 dBm
–100 dBc (nominal)
Carrier Frequency
>26.5 GHz
First RF Order
e
(f
≥ 10 MHz from carrier)
–30 dBm
–100 dBc (nominal)
Higher RF Order
f
(f
≥ 10 MHz from carrier)
−30 dBm
–100 dBc (nominal)
LO-Related Spurious Response
f > 600 MHz from carrier
10 MHz to 3.6 GHz
−10 dBm −90 dBc + 20 × log(N)
(nominal)
Sidebands, offset from CW signal
≤200 Hz
−70 dBc g
(nominal)
200 Hz to 3 kHz
−73 dBc g
(nominal)
3 kHz to 30 kHz
−73 dBc (nominal)
30 kHz to 10 MHz
−80 dBc (nominal)