27 gsm/edge measurement application, Gsm/edge measurement application – Agilent Technologies N9010A User Manual
Page 241
241
27
GSM/EDGE Measurement Application
This chapter contains specifications for the N9071A GSM/EDGE/EDGE Evolution Measurement
Application. For EDGE Evolution (EGPRS2) including Normal Burst (16QAM/32QAM) and High
Symbol Rate (HSR) Burst, option 3FP is required.
Additional Definitions and Requirements
Because digital communications signals are noise-like, all measurements will have variations. The
specifications apply only with adequate averaging to remove those variations.
The specifications apply in the frequency range documented in In-Band Frequency Range.
The specifications for this chapter apply only to instruments with Frequency Option 503, 507, 513 or
526. For Instruments with higher frequency options, the performance is nominal only and not subject to
any warranted specifications.