Agilent Technologies N9010A - Manual (Page 323)

Chapter 35 323
WLAN Measurement Application
List Sequence Measurements
Description Specifications Supplemental Information
64QAM EVM
RF Input Level = –10 dBm,
Attenuation = 10 dB,
20 to 30°C
Radio standards are:
802.11a/g/j/p (OFDM),
802.11g (DSSS-OFDM),
802.11n (20 MHz) or
802.11ac (20 MHz),
Center Frequency in 2.4 GHz Band
Code Rate: 3/4
EQ Training: Channel Est Seq Only
Track Phase On
Track Amp Off
Track Timing Off
EVM
Floor
ab
–49.0 dB (0.36%) (nominal)
Accuracy
(EVM Range:0 to 8.0%) ±0.30% (nominal)
Frequency Error
Range ±100 kHz (nominal)
Accuracy ±10 Hz + tfa
c
(nominal)
a. In these specifications, those values with dB units are the specifications, while those with % units, in
parentheses, are conversions from the dB units to % for reader convenience.
b. The EVM Floor specification applies when Phase Noise Optimization is set to Wide-offset (>30 kHz)
c. tfa = transmitter frequency
× frequency reference accuracy.