Agilent Technologies N9010A - Manual (Page 78)

78 Chapter 2
I/Q Analyzer
Specifications Affected by I/Q Analyzer
Specifications Affected by I/Q Analyzer
Specification Name Information
Number of Frequency Display Trace
Points (buckets) Does not apply.
Resolution Bandwidth See “Frequency” on page 79 in this chapter.
Video Bandwidth Not available.
Clipping-to-Noise Dynamic Range See “Clipping-to-Noise Dynamic Range” on page 80 in this
chapter.
Resolution Bandwidth Switching
Uncertainty Not specified because it is negligible.
Available Detectors Does not apply.
Spurious Responses The “Spurious Responses” on page 48 of core specifications
still apply. Additional bandwidth-option-dependent spurious
responses are given in the Analysis Bandwidth chapter for
any optional bandwidths in use.
IF Amplitude Flatness See “IF Frequency Response” on page 36 of the core
specifications for the 10 MHz bandwidth. Specifications for
wider bandwidths are given in the Analysis Bandwidth
chapter for any optional bandwidths in use.
IF Phase Linearity See “IF Phase Linearity” on page 37 of the core
specifications for the 10 MHz bandwidth. Specifications for
wider bandwidths are given in the Analysis Bandwidth
chapter for any optional bandwidths in use.
Data Acquisition See “Data Acquisition” on page 81 in this chapter for the
10 MHz bandwidth. Specifications for wider bandwidths are
given in the Analysis Bandwidth chapter for any optional
bandwidths in use.