Agilent Technologies N9010A - Manual (Page 313)

Chapter 35 313
WLAN Measurement Application
Measurements
Description Specifications Supplemental Information
64QAM EVM
RF Input Level = –10 dBm,
Attenuation = 10 dB,
20 to 30°C
Radio standards are:
802.11a/g/j/p (OFDM),
802.11g (DSSS-OFDM),
802.11n (20 MHz)
a
or
802.11ac (20 MHz) 5.0 GHz Band
Code Rate: 3/4
EQ Training: Channel Est Seq Only
Track Phase On
Track Amp Off
Track Timing Off
Center Freq Center Freq
2.4 GHz 2.4 GHz (nominal) 5.0 GHz (nominal)
EVM
Floor
bc
–43 dB (0.7%) –49 dB (0.36%) –47.0 dB (0.45%)
Accuracy ±0.30% ±0.30%
(EVM Range:0 to 8.0%)
Frequency Error
Range ±100 kHz ±100 kHz
Accuracy ±10 Hz + tfa
d
±10 Hz + tfa
d
a. Requires Option B25 or B40 (IF bandwidth above 10 MHz).
b. In these specifications, those values with dB units are the specifications, while those with % units, in
parentheses, are conversions from the dB units to % for reader convenience.
c. The EVM Floor specification applies when Phase Noise Optimization is set to Wide-offset (>30 kHz)
d. tfa = transmitter frequency
× frequency reference accuracy.