Agilent Technologies N9010A - Manual (Page 72)

72 Chapter 1
Agilent EXA Signal Analyzer
Inputs/Outputs
Rear Panel
Description Specifications Supplemental Information
10 MHz Out
Connector BNC female
Impedance 50
Ω (nominal)
Output Amplitude
≥0 dBm (nominal)
Output Configuration AC coupled, sinusoidal
Frequency 10 MHz
×
(1 + frequency reference accuracy)
Description Specifications Supplemental Information
Ext Ref In
Connector BNC female Note: Analyzer noise sidebands and
spurious response performance may be
affected by the quality of the external
reference used. See footnote
c
in the
Phase Noise specifications within the
Dynamic Range section on
page 53 .
Impedance 50
Ω (nominal)
Input Amplitude Range
sine wave
square wave
−5 to +10 dBm (nominal)
0.2 to 1.5 V peak-to-peak (nominal)
Input Frequency 10 MHz (nominal)
Lock range
±5 × 10 −6
of ideal external
reference input frequency
Description Specifications Supplemental Information
Sync Reserved for future use
Connector BNC female
Description Specifications Supplemental Information
Trigger Inputs
(Trigger 1 In, Trigger 2 In)
Either trigger source may be selected
Connector BNC female
Impedance 10 k
Ω (nominal)
Trigger Level Range
−5 to +5 V
1.5 V (TTL) factory preset