Agilent Technologies N9010A - Manual (Page 268)

268 Chapter 30
LTE Measurement Application
Measurements
Description Specifications Supplemental Information
Adjacent Channel Power Single Carrier
Minimum power at RF
input
−36 dBm (nominal)
Accuracy Channel Bandwidth
Radio Offset 5 MHz 10 MHz 20 MHz ACPR Range for Specification
MS Adjacent
a ±0.18 dB ±0.31 dB ±0.44 dB −33 to −27 dBc with opt ML b
BTS Adjacent
c ±1.23 dB ±1.79. dB ±2.40 dB −48 to −42 dBc with opt ML d
BTS Alternate
c ±0.29 dB ±0.46 dB ±0.87 dB −48 to −42 dBc with opt ML e
Dynamic Range E-UTRA Test conditions
f
Offset
Channel
BW
Dynamic
Range
(nominal) Optimum
Mixer Level
(nominal)
Adjacent 5 MHz 70.0 dB
−16.5 dBm
Adjacent 10 MHz 69.3 dB
−16.5 dBm
Adjacent 20 MHz 68.4 dB
−16.3dBm
Alternate 5 MHz 75.8 dB
−16.6 dBm
Alternate 10 MHz 73.2 dB
−16.4 dBm
Alternate 20 MHz 70.3 dB
−16.3 dBm
Dynamic Range UTRA Test conditions
f
Offset
Channel
BW
Dynamic
Range
(nominal) Optimum
Mixer Level
(nominal)
2.5 MHz 5 MHz 70.5 dB
−16.6 dBm
2.5 MHz 10 MHz 70.5 dB
−16.4 dBm
2.5 MHz 20 MHz 71.4 dB
−16.3 dBm
7.5 MHz 5 MHz 76. 5 dB
−16.6 dBm
7.5 MHz 10 MHz 76.5 dB
−16.4 dBm
7.5 MHz 20 MHz 75.7 dB
−16.3 dBm
a. Measurement bandwidths for mobile stations are 4.5, 9.0 and 18.0 MHz for channel bandwidths of 5,
10 and 20 MHz respectively.
b. The optimum mixer levels (ML) are
−22, −23 and −19 dBm for channel bandwidths of 5, 10 and 20
MHz respectively.
c. Measurement bandwidths for base transceiver stations are 4.515, 9.015 and 18.015 MHz for channel
bandwidths of 5, 10 and 20 MHz respectively.
d. The optimum mixer levels (ML) are
−18, −18 and −15 dBm for channel bandwidths of 5, 10 and 20
MHz respectively.
e. The optimum mixer level (ML) is
−8 dBm.
f. E-TM1.1 and E-TM1.2 used for test. Noise Correction set to On.