Agilent Technologies N9010A - Manual (Page 63)

Chapter 1 63
Agilent EXA Signal Analyzer
Power Suite Measurements
Description Specifications Supplemental Information
Burst Power
Methods Power above threshold
Power within burst width
Results Output power, average
Output power, single burst
Maximum power
Minimum power within burst
Burst width
Description Specifications Supplemental Information
TOI (Third Order
Intermodulation) Measures TOI of a signal with
two dominant tones
Results Relative IM tone powers (dBc)
Absolute tone powers (dBm)
Intercept (dBm)
Description Specifications Supplemental Information
Harmonic Distortion
Maximum harmonic number 10th
Results Fundamental Power (dBm)
Relative harmonics power (dBc)
Total harmonic distortion (%, dBc)
Description Specifications Supplemental Information
Spurious Emissions Table-driven spurious signals;
search across regions
Case: Radio Std = 3GPP W-CDMA
Dynamic Range
a
(1 to 3.6 GHz)
93.1 dB 98.4 dB (typical)
Sensitivity, absolute
(1 to 3.6 GHz)
−79.4 dBm −85.4 dBm (typical)
Accuracy Attenuation = 10 dB
9 kHz to 3.6 GHz
±0.38 dB (95th percentile)
3.5 to 8.4 GHz
±1.22 dB (95th percentile)
8.3 to 13.6 GHz
±1.59 dB (95th percentile)
a. The dynamic range is specified with the mixer level at +3 dBm, where up to 1 dB of compression can
occur, degrading accuracy by 1 dB.