Agilent Technologies N9010A - Manual (Page 46)

46 Chapter 1
Agilent EXA Signal Analyzer
Dynamic Range
Displayed Average Noise Level
Description Specifications Supplemental
Information
Displayed Average Noise Level
(DANL)
a
Input terminated
Sample or Average detector
Averaging type = Log
0 dB input attenuation
IF Gain = High
1 Hz Resolution Bandwidth
Refer to the footnote
for
Band Overlaps on
page 21
.
mmW without Option B40, DP2, or MPB
mmW with Option B40, DP2, or MPB
RF/
μW(Option 503, 507, 513, or 526)
20 to 30
°C
Full range Typical
10 Hz x x x –90 dBm (nominal)
20 Hz x x x –100 dBm (nominal)
100 Hz x x x –110 dBm (nominal)
1 kHz x x x –120 dBm (nominal)
9 kHz to 1 MHz x –125 dBm (nominal)
9 kHz to 1 MHz x x
−130 dBm
1 to 10 MHz
b
x
−147 dBm −145 dBm −149 dBm
1 MHz to 1.2 GHz x x
−152 dBm −151 dBm −155 dBm
10 MHz to 2.1 GHz x
−148 dBm −146 dBm −150 dBm
1.2 to 2.1 GHz x x
−151 dBm −150 dBm −154 dBm
2.1 to 3.6 GHz x
−147 dBm −145 dBm −149 dBm
2.1 to 3.6 GHz x x
−149 dBm −148 dBm −152 dBm
3.6 to 7 GHz x
−147 dBm −145 dBm −149 dBm
3.5 to 4.2 GHz x
−142 dBm −140 dBm −146 dBm
3.5 to 4.2 GHz x
−144 dBm −142 dBm −147 dBm
4.2 to 8.4 GHz x
−143 dBm −141 dBm −148 dBm
4.2 to 8.4 GHz x
−145 dBm −143 dBm −150 dBm
7 to 13.6 GHz x
−143 dBm −141 dBm −147 dBm
8.3 to 13.6 GHz x
−145 dBm −143 dBm −148 dBm
8.3 to 13.6 GHz x
−147 dBm −145 dBm −150 dBm
13.5 to 22 GHz x
−137 dBm −134 dBm −142 dBm
13.5 to 20 GHz x
−142 dBm −140 dBm −146 dBm
13.5 to 20 GHz x
−145 dBm −143 dBm −148 dBm