Agilent Technologies N9010A - Manual (Page 179)

179
19 1xEV-DO Measurement Application
This chapter contains specifications for the N9076A 1xEV-DO measurement application.
Additional Definitions and Requirements
Because digital communications signals are noise-like, all measurements will have variations. The
specifications apply only with adequate averaging to remove those variations.
The specifications apply in the frequency range documented in In-Band Frequency Range.
The specifications for this chapter apply only to instruments with Frequency Option 503, 507, 513 or
526. For Instruments with higher frequency options, the performance is nominal only and not subject to
any warranted specifications.
This application supports forward link radio configurations 1 to 5 and reverse link radio configurations
1-4. cdmaOne signals can be analyzed by using radio configuration 1 or 2.