Agilent Technologies N9010A - Manual (Page 180)

180 Chapter 19
1xEV-DO Measurement Application
Measurements
Measurements
Description Specifications Supplemental Information
Channel Power
(1.23 MHz Integration BW)
Input signal must not be bursted
Minimum power at RF input
−50 dBm (nominal)
Absolute power accuracy
a
(20 to 30
°C)
a. Absolute power accuracy includes all error sources for in-band signals except mismatch errors and
repeatability due to incomplete averaging. It applies when the mixer level is high enough that measure-
ment floor contribution is negligible.
±0.94 dB ±0.27 dB (typical)
Measurement floor
−84 dBm (nominal)
Description Specifications Supplemental Information
Power Statistics CCDF
Minimum power at RF Input
−40 dBm (nominal)
Histogram Resolution 0.01 dB
a
a. The Complementary Cumulative Distribution Function (CCDF) is a reformatting of a histogram of the
power envelope. The width of the amplitude bins used by the histogram is the histogram resolution.
The resolution of the CCDF will be the same as the width of those bins.
Description Specifications Supplemental Information
Occupied Bandwidth Input signal must not be bursted
Minimum carrier power at RF Input
−40 dBm (nominal)
Frequency accuracy ±2 kHz (nominal)
RBW = 30 kHz, Number of Points =
1001, Span = 2 MHz
Description Specifications Supplemental Information
Power vs. Time
Minimum power at RF input
−50 dBm (nominal)
Absolute power accuracy
a
a. Absolute power accuracy includes all error sources for in-band signals except mismatch errors and
repeatability due to incomplete averaging. It applies when the mixer level is high enough that measure-
ment floor contribution is negligible.
±0.30 dB (nominal)
Measurement floor
−84.8 dBm (nominal)
Relative power accuracy
b
±0.16 dB (nominal)