Agilent Technologies N9010A - Manual (Page 69)

Chapter 1 69
Agilent EXA Signal Analyzer
General
Description Specification Supplemental Information
Power Requirements
Low Range
Voltage 100 to 120 V
Frequency
Serial Prefix < MY4801,
SG4801, or US4801
50 or 60 Hz
Serial Prefix
≥ MY4801,
SG4801, or US4801
50, 60 or 400 Hz
High Range
Voltage 220 to 240 V
Frequency 50 or 60 Hz
Power Consumption, On 350 W Maximum
Power Consumption, Standby 20 W Standby power is not supplied to
frequency reference oscillator.
Typical instrument configuration Power (nominal)
Base 3.6 GHz instrument (N9010A-503) 176 W
Base 8.4 GHz instrument (N9010A-508) 179 W
Base 13 GHz instrument (N9010A-513) 183 W
Base 26.5 GHz instrument (N9010A-526) 194 W
Base 32/44 GHz instrument (N9010A-532/544) 225 W
Adding Option B40, MPB, or DP2 to base
instrument +45 W
Description Supplemental Information
Measurement Speed
a
a. Sweep Points = 101.
Nominal
Standard w/ Option PC4
Local measurement and display update rate
bc
11 ms (90/s) 4 ms (250/s)
Remote measurement and LAN transfer rate
bc
6 ms (167/s) 5 ms (200/s)
Marker Peak Search 5 ms 1.5 ms
Center Frequency Tune and Transfer (RF) 22 ms 20 ms
Center Frequency Tune and Transfer (µW) 49 ms 47 ms
Measurement/Mode Switching 75 ms 39 ms
W-CDMA ACLR measurement time See page 62
Measurement Time vs. Span See page 29