Agilent Technologies N9010A - Manual (Page 129)

Chapter 10 129
Option ESC - External Source Control
General Specifications
Description Specification Supplemental Information
Supported External Sources
Agilent EXG N5171B/72B (firmware B.01.01 or later)
ab
a. Firmware revision A.11.00 or later is required for the signal analyzer to control the analog X-Series
EXG (N5171B) and MXG (N5181B).
b. Firmware revision A.12.00 or later is required for the signal analyzer to control the vector X-Series
EXG (N5172B) and MXG (N5182B).
Agilent MXG N5181B/82B (firmware B.01.01 or later)
ab
N5181A (firmware A.01.80 or later)
N5182A (firmware A.01.80 or later)
N5183A (firmware A.01.80 or later)
Agilent PSG E8257D (firmware C.06.15 or later)
E8267D (firmware C.06.15 or later)
IO interface connection
between EXG/MXG and SA
between PSG and SA
LAN, GPIB, or USB
LAN or GPIB