Teledyne LeCroy Sierra M122 User Manual - Manual (Page 80)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
78 Sierra M122 SAS/SATA Protocol Analyzer User Manual
Figure 2.40: External/Manual Trigger Dialog
Device Sleep
To set up Device Sleep click the Device Sleep category. Select Rising Edge or Falling Edge.
Figure 2.41: Device Sleep Dialog
Bus Condition
Double‐click Bus Condition in the Patterns window of the Capture Project dialog to open
the Bus Conditions dialog.
Figure 2.42: SAS: Bus Condition Dialog
SAS vs. SATA: SATA Dialog separates the COMINIT and COMRESET check boxes and
replaces COMWAKE with Host COMWAKE and COMSAS with Device COMWAKE.
Check the Conditions to trigger on and click OK.
Port ID