Teledyne LeCroy Sierra M122 User Manual - Manual (Page 58)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
56 Sierra M122 SAS/SATA Protocol Analyzer User Manual
You can view expanded traffic (particularly during discovery) in a spreadsheet format. You
can use column headers with SAS Address Pairs. For example, instead of I1, T1, I2, T2, the
columns are Source/Destination SAS Address pairs, such as S1:SEP or S2:EXP 0.
2.2.12 Trace Properties
Select File > Trace Properties to see the properties of the trace. For more information refer
to
“Trace Properties” on page 115 .
2.2.13 Edit Comment
You can write comments and edit them for a trace for future use. Select File > Edit Comment
to view the edit window. Key in the comments and close the window.
2.2.14 Projects
You can define a new project, starting with the default project definition, or modify the
settings for the last project run.
New Default Project
To start a New project, select File > New on the main menu bar and choose
Protocol Analyzer to open a new project with default settings that you can modify (see
“Main Window” on page 43 ).
Last Project

Clicking the Green button opens the last project run, so you can modify it.
Project File Types
Projects have the following file types:
*.asl Decoding script file (in the Examples folder “User Define Decoding Script”
subfolder)
*.cfg Display Configuration file (in the System folder “Config” subfolder)
*.dat DataBlock file (in the System folder “DataBlock” subfolder)
*.sac SAS Protocol Analyzer/Capture Project/Viewer file (in the Examples folder
“EasyCaptr”, “AdvanceCaptr”, or “Exerciser” subfolders)
*.saf Device Identifier file
*.scs SAS Sample file (in the SAS Examples folder “Sample” subfolder)
*.sfl Filter configuration file
*.spg Single‐role Pattern Generator file (in the Examples folder
SAS “PatternGenerator\Single role (spg files)” subfolder and