Teledyne LeCroy Sierra M122 User Manual - Manual (Page 369)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 367
Display Options Teledyne LeCroy
The Generator Toolbar has the following:
 Start Generation
 Stop Generation
 Resume Generation
 Connect Link
 Disconnect Link
 Generation Options
From time to time (such as following a software upgrade), it is possible for the buttons on
the toolbar to not match their intended function. You can reset the toolbar by performing
the following steps:
1. Select View > Toolbars from the menu bar.
2. Select Customize from the submenu to display the Customize dialog box.
Figure 5.34: Customize Commands