Teledyne LeCroy Sierra M122 User Manual - Manual (Page 68)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
66 Sierra M122 SAS/SATA Protocol Analyzer User Manual
STP Frame
Double‐click STP Frame to open the FIS Type dialog.
Figure 2.22: FIS Pattern Dialog
Click the down arrow next to the Type drop‐down list box, choose an FIS type to capture
or exclude, and click OK. Repeat for additional types.
Available FIS Types:
 Register Host to Device
 Register Device to Host
 Set Device Bits
 DMA Activate
 DMA Setup
 BIST
 PIO Setup
 Data
 Vendor