Teledyne LeCroy Sierra M122 User Manual - Manual (Page 60)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
58 Sierra M122 SAS/SATA Protocol Analyzer User Manual
Figure 2.13: File Open Dialog
Figure 2.14: SAS: Sample Protocol Analysis Project
SAS vs. SATA: For Pattern Parameters, SATA Dialog adds FIS, FIS Pattern, and ATA
Command Pattern and does not have STP Frame, SSP Frame, SMP Frame, and Address
Frame.
4. Click the Record button to execute the pre‐defined example.
5. After the project runs, you see an analyzer trace capture display similar to the one
shown in Figure 2.15 on page 59.