Teledyne LeCroy Sierra M122 User Manual - Manual (Page 330)

Teledyne LeCroy Sierra Trainer Generation Language
328 Sierra M122 SAS/SATA Protocol Analyzer User Manual
 DONE (RESERVED TIMEOUT 1)
 SAS Specific Script‐Defined Constants
 SAS_AF_DT_NO_DEVICE_ATTACHED
 SAS_AF_DT_END_DEVICE
 SAS_AF_DT_EDGE_EXPANDER_DEVICE
 SAS_AF_DT_FANOUT_EXPANDER_DEVICE
 SAS_AF_FT_IDENTIFY
 SAS_AF_FT_OPEN
 SAS_AF_PROTOCOL_SMP
 SAS_AF_PROTOCOL_SSP
 SAS_AF_PROTOCOL_STP
 SAS_AF_PROTOCOL_UNKNOWN
 SAS_AF_RATE_1_5_GBPS
 SAS_AF_RATE_3_GBPS
 SAS_AF_RATE_6_GBPS
 SAS_AF_RATE_12_GBPS
 SMP_FRAME_TYPE_REQUEST
 SMP_FRAME_TYPE_RESPONSE
 SMP_REPORT_GENERAL
 SMP_REPORT_MANUFACTURER_INFO
 SMP_DISCOVER
 SMP_REPORT_PHY_ERROR_LOG
 SMP_REPORT_PHY_SATA
 SMP_REPORT_ROUTE_INFO
 SMP_CONFIGURE_ROUTE_INFO
 SMP_PHY_CONTROL
 SSP_FRAME_TYPE_DATA
 SSP_FRAME_TYPE_XFER_RDY
 SSP_FRAME_TYPE_COMMAND
 SSP_FRAME_TYPE_RESPONSE
 SSP_FRAME_TYPE_TASK
 SSP_FRAME_TYPE_VENDOR
 MUX (LOGICAL 0)
 MUX (LOGICAL 1)
 BREAK_REPLY
 TRAIN
 TRAIN_DONE
 PS_ACK
 PS_NAK
 PS_REQ_PARTIAL
 PS_REQ_SLUMBER
Primitive Category
 ALIGN: 0, 1, 2, or 3
 NOTIFY: ENABLE SPINUP, RESERVED 0, RESERVED 1, or RESERVED 2
 ACK
 NAK: CRC ERROR, RESERVED 0, RESERVED 1, or RESERVED 2
 RRDY: NORMAL, RESERVED 0, RESERVED 1