Teledyne LeCroy Sierra M122 User Manual - Manual (Page 156)

Teledyne LeCroy Using the Power Expansion Card
154 Sierra M122 SAS/SATA Protocol Analyzer User Manual
3.4 Using the Power Expansion Card
You can use the Power Expansion Card to power the drives under test. See “Using the
Power Expansion Card” on page 26 .
3.5 Running Verification Script Engine (VSE)
You can perform custom post‐process analysis of the open trace by running a verification
script over the trace. A verification script instructs the application to send trace and
analysis information to the script. A verification script also contains script code, written
using CATC Script Language (CSL) (see the CSL_RefManual.pdf document in the docs
directory of the installation), used to process trace data and output that data in different
formats.
Note: You may write your own verification scripts to perform custom verification and analysis. For
information on how to write a verification script, see the Verification Script Engine Reference
Manual.
To run a verification script over a trace:
1. Select the main menu item Analysis > Verification script or click the
Running verification scripts button on the main tool bar. The
Run Verification Scripts dialog opens, from which you choose and then run one or
several verification scripts.
Figure 3.70: Run Verification Scripts Dialog