Teledyne LeCroy Sierra M122 User Manual User Manual
Page 48
Teledyne LeCroy
Easy Mode (Pre‐Defined Setups)
46
Sierra M122 SAS/SATA Protocol Analyzer User Manual
Exclude XXXX
Check this to exclude XXXX patterns from the data capture.
Note:
The validity of time stamps during Idles is traded off against good buffer memory utilization
when using ‘Exclude XXXX’.
Exclude Dev Slp Packets (SATA)
Check this to exclude Dev Slp Packets from the data capture.
Exclude Payload except
Check this to exclude Payload of Data Frames from the data capture. You can except a
number of DWORD(s).
Note:
) does not reflect excluded Payload of Data
Frames.
Note:
When showing truncated data in the Data Payload View, the truncation points are marked with
a separator placed between payloads. You can get more information about the data exclusion
using the tooltip over the separator.
Exclude ALIGN
Check this to exclude ALIGN primitives from the data capture.
Exclude RRDY (SAS only)
Check this to exclude RRDY primitives from the data capture.
Exclude NOTIFY (SAS only)
Check this to exclude NOTIFY primitives from the data capture.
Exclude Idle
Check this to exclude Idles from the data capture.
Define different patterns for pre‐trigger and post‐trigger data captures
Replaces the Capture tab with a Pre‐Trigger Capture tab and a Post‐Trigger Capture tab.