Teledyne LeCroy Sierra M122 User Manual - Manual (Page 75)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 73
SAS/SATA Software Menus and Toolbars Teledyne LeCroy
Data
Figure 2.34: FIS Pattern - Data Dialog
Vendor
Vendor is for FIS Pattern.
Figure 2.35: FIS Pattern - Vendor Dialog
2.2.16 Trigger Setup
The Trigger tab in the analysis project dialog allows you to specify when the analyzer
completes a data capture. Three trigger modes are available:
 Don’t care (Snapshot) is the default
 Manual Trig
 Pattern
When data capture starts with Don’t care (Snapshot) selected, the analyzer triggers on
the first data pattern on the bus.