Teledyne LeCroy Sierra M122 User Manual - Manual (Page 214)

Teledyne LeCroy External Trig Setting
212 Sierra M122 SAS/SATA Protocol Analyzer User Manual
Figure 3.140: Floating Licence Dialog
3.18 External Trig Setting
The External Trig Setting dialog displays the External Trig Out Setting and External Trig In
Setting as High Active, Low Active, or Toggle.
Figure 3.141: External Trigger Setting Dialog
To display the External Trig Setting dialog, select Setup > External Trig Setting.
External Trig Out Setting
The Analyzer can send a Low or High external signal anytime a trigger occurs. Select the
External Trig Out Setting: High Active, Low Active, or Toggle from High to Low or Low to
High once (3.3 V output).
Enter the External TrigOut pulse width.