Teledyne LeCroy Sierra M122 User Manual - Manual (Page 217)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 215
User‐Defined Decoding Teledyne LeCroy
3.20 User-Defined Decoding
User‐defined decoding allows you to create a definition file to interpret commands and
frames that are not in the standard set recognized by the software.
Select Setup > User Defined Decoding to open the User Defined Decoding dialog.
Figure 3.146: SAS: User Defined Decoding
SAS vs. SATA: SAS adds SCSI Commands, SSP Frames, and SMP Frames.
Check ATA Commands and/or STP frames. Click the ellipses next to a command type text
box to display the Open dialog. Choose an appropriate script file and click Open.
Figure 3.147: Choosing a Script File