Teledyne LeCroy Sierra M122 User Manual - Manual (Page 331)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 329
Sierra Trainer Generation Language Teledyne LeCroy
 AIP: NORMAL, RESERVED 0, RESERVED 1, RESERVED 2, RESERVED 3, WAITING ON
CONNECTION, WAITING ON DEVICE, or WAITING ON PARTIAL
 BREAK
 CLOSE: CLEAR AFFILIATION, NORMAL, RESERVED 0, RESERVED 1
 CREDIT BLOCKED
 OPEN ACCEPT
 OPEN REJECT: BAD DESTINATION, CONNECTION RATE NOT SUPPORTED, NO DES‐
TINATION, PATHWAY BLOCKED, PROTOCOL NOT SUPPORTED, RESERVED ABAN‐
DON 0, RESERVED ABANDON 1, RESERVED ABANDON 2, RESERVED ABANDON 3,
RESERVED CONTINUE 0, RESERVED CONTINUE 1, RESERVED INITIALIZE 0,
RESERVED INITIALIZE 1, RESERVED STOP 0, RESERVED STOP 1, RETRY, STP
RESOURCES BUSY, or WRONG DESTINATION
 BROADCAST: CHANGE, RESERVED 0, RESERVED 1, RESERVED 2, RESERVED 3,
RESERVED 4, RESERVED CHANGE 0, or RESERVED CHANGE 1
 DONE: ACK/NAK TIMEOUT, CREDIT TIMEOUT, NORMAL, RESERVED 0, RESERVED
1, RESERVED TIMEOUT 0, or RESERVED TIMEOUT 1
 SATA FLOW CTRL PRIMITIVE
 SATA IDLE PRIMITIVE
 SAS PS PRIMITIVE: PS_REQ_PARTIAL, PS_REQ_SLUMBER, PS_ACK, or PS_NAK
Wait Commands
Syntax:
WAIT_FOR { ... ... }