Teledyne LeCroy Sierra M122 User Manual - Manual (Page 103)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 101
SAS/SATA Software Menus and Toolbars Teledyne LeCroy
 6G ~ 530 ns
 3G ~ 730 ns
 1.5G ~ 1020 ns
External Trig In Setting
An external Low or High input signal can cause triggering. Select the
External Trig In Setting: High Active, Low Active, or Toggle from High to Low or Low to
High once (3.3 V output).
Choose Port Speed
The default speed is Autospeed. You can also select the port speed from the 
drop‐down list: 1.5 Gbps, 3.0 Gbps, 6.0 Gbps or 12.0 Gbps.
Note: If a Port ID check box has no check, the analyzer does not capture any patterns for that port. The
system allocates trace memory for that port to its adjacent port, for example: I1, T1 <‐> I2, T2.
Ports Configuration
Click the Port Configuration button to display the Set Port Configuration dialog.
Figure 2.71: SAS: Set Port Configuration Dialog