Teledyne LeCroy Sierra M122 User Manual - Manual (Page 36)

Teledyne LeCroy Teledyne LeCroy SAS/SATA Protocol Suite Menu Options and Toolbars
34 Sierra M122 SAS/SATA Protocol Analyzer User Manual
Figure 1.20: File Menu Option
1.19.2 Setup
For special work, you can use the Setup menu (see Figure 1.21 on page 35 ) to perform
the following actions:
 TxRxVout & Pre‐emphasis (see “TxRxVout & Preemphasis” on page 197 )
 User Defined Decoding (see “User‐Defined Decoding” on page 215 )
 External Trig Setting (see “External Trig Setting” on page 212 )
 Update Device (see “Update Device” on page 213 )
 All Connected Devices (see “Select Device” on page 22 )
 Find DUT finds the Device Under Test (see “Find DUT” on page 218 )
 Power Source Control turns the Device Under Test on and off
 Manage Setup Licences (see “Floating License” on page 211 )
 Preferences (see “Preferences” on page 202 )
 Self Test (see “Self Test” on page 320 )
 Data Block (see “Data Blocks” on page 139 )
 Set Port Alias (see “Set Port Alias” on page 195 )
 Set SAS Address Alias (see “SAS Address Alias (SAS only)” on page 196 )