Teledyne LeCroy Sierra M122 User Manual - Manual (Page 341)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 339
Sierra Trainer Generation Language Teledyne LeCroy
ReconnectOnRun 0 When “AdvanceConnect” and “ReconnectOnRun”
are set, the “Connect” command forces the Trainer
to disconnect the physical link before executing the
“Connect” command.
When “AdvanceConnect” is not set, this setting does
not affect the Trainer.
AdvanceConnect 0 When set, the Trainer uses the
“PHY Capability” and “SupportSNW” settings,
instead of the “Set Speed” settings, for executing the
“Connect” command.
OutputOffAfterDC On
Off If set to On, Trainer puts DC Idle on line when it
detects sync lost on the link.
Setting
Default
Value
Description