Teledyne LeCroy Sierra M122 User Manual - Manual (Page 329)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 327
Sierra Trainer Generation Language Teledyne LeCroy
 AIP (RESERVED 0)
 AIP (RESERVED 1)
 AIP (RESERVED 2)
 AIP (RESERVED 3)
 AIP (WAITING ON CONNECTION)
 AIP (WAITING ON DEVICE)
 AIP (WAITING ON PARTIAL)
 BREAK
 BROADCAST (CHANGE)
 BROADCAST (RESERVED 0)
 BROADCAST (RESERVED 1)
 BROADCAST (RESERVED 2)
 BROADCAST (RESERVED 3)
 BROADCAST (RESERVED 4)
 BROADCAST (RESERVED CHANGE 0)
 BROADCAST (RESERVED CHANGE 1)
 CLOSE (CLEAR AFFILIATION)
 CLOSE (NORMAL)
 CLOSE (RESERVED 0)
 CLOSE (RESERVED 1)
 ERROR
 HARD_RESET
 OPEN_ACCEPT
 OPEN_REJECT (BAD DESTINATION)
 OPEN_REJECT (CONNECTION RATE NOT SUPPORTED)
 OPEN_REJECT (NO DESTINATION)
 OPEN_REJECT (PATHWAY BLOCKED)
 OPEN_REJECT (PROTOCOL NOT SUPPORTED)
 OPEN_REJECT (RESERVED ABANDON 0)
 OPEN_REJECT (RESERVED ABANDON 1)
 OPEN_REJECT (RESERVED ABANDON 2)
 OPEN_REJECT (RESERVED ABANDON 3)
 OPEN_REJECT (RESERVED CONTINUE 0)
 OPEN_REJECT (RESERVED CONTINUE 1)
 OPEN_REJECT (RESERVED INITIALIZE 0)
 OPEN_REJECT (RESERVED INITIALIZE 1)
 OPEN_REJECT (RESERVED STOP 0)
 OPEN_REJECT (RESERVED STOP 1)
 OPEN_REJECT (RETRY)
 OPEN_REJECT (STP RESOURCES BUSY)
 OPEN_REJECT (WRONG DESTINATION)
 DONE (ACK/NAK TIMEOUT)
 DONE (CREDIT TIMEOUT)
 DONE (NORMAL)
 DONE (RESERVED 0)
 DONE (RESERVED 1)
 DONE (RESERVED TIMEOUT 0)