Teledyne LeCroy Sierra M122 User Manual - Manual (Page 56)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
54 Sierra M122 SAS/SATA Protocol Analyzer User Manual
You can limit the range of the saved file. You can save:
 All Trace
 Range between selected cursors
 Range between SCSI Commands or Transport
You can import SCSI Commands, Task Management, ATA Commands, SSP Frames, SMP
Frames, SMP Commands, or STP Frames.
You can select the Port.
In the Project Name, enter a valid file name.
2.2.10 Export to Trainer
The Export to Trainer dialog, accessible from the File menu, allows exporting data to a file
in a format supported by the timer.
Figure 2.11: Export to Trainer (SAS) Dialog
In the Export to Trainer dialog you can
 Limit the range of the saved file. You can save:
 All Traces
 Range between selected cursors
 Range between SCSI Commands, SMP Commands or Transport
 Import SSP Frames, SMP Frames, or STP Frames (see “Events and Event Proper‐
ties” on page 460 ).
 Insert Waits (see “Wait Commands” on page 436 ).
 Use Auto Alignment (see “The Global Setting “AutoAlign”” on page 407 ).
 Select the Port (see “Setup Menu” on page 397 ).
 Indicate Trainer Generation File Name and click Export to export the trainer
generation file.