Teledyne LeCroy Sierra M122 User Manual - Manual (Page 164)

Teledyne LeCroy Navigation + View Toolbar
162 Sierra M122 SAS/SATA Protocol Analyzer User Manual
3.6.2 Filtering
The Filtering menu and options allow you to modify data in the sample viewer display to
exclude packets with a set of user‐defined patterns and show the results in all views.
To set up filtering, you must have a viewer display open.
The Filtering menu has the options:
 Enable Filtering (see “Enable Filter” on page 172 )
 Filtering (see “Filter Setup” on page 162 )
 Link Layer (SAS)
 Transport Layer (SAS)
 Application Layer (SAS)
 Physical Layer (SATA)
 FIS Layer (SATA)
 Command Layer (SATA)
 Filter Idles (see “Filter Idle” on page 172 )
3.6.3 Filter Setup
To display the Filter setup dialog, click the Filter button on the Viewer toolbar or
select View > Filtering.
Figure 3.82: SAS/SATA: Filter Setup Dialog