Teledyne LeCroy Sierra M122 User Manual - Manual (Page 190)

Teledyne LeCroy Port Status
188 Sierra M122 SAS/SATA Protocol Analyzer User Manual
Figure 3.117: Expand/Collapse Specific Layers.
3.8 Port Status
You can get an overview of the active ports by clicking the Port Status button at the
bottom right of the application window.
The Port Status displays the Port, Speed, and Analyzer.
In addition to displaying OOB, Link, Frame, and Error, a display showing the % buffer full
opens when a trigger occurs.
Figure 3.118: Port Status Window and Capturing Time
1.Pre‐trig capturing (trig is 50%)
2. Trig point (shown by red bar; 36% pre trig was captured)
3. Post‐trig capturing (50% post‐trig was captured and capturing has stopped)
Note: If sample capture occurs with more than one unit active, additional Port Status windows display.