Teledyne LeCroy Sierra M122 User Manual - Manual (Page 245)

Sierra M122 SAS/SATA Protocol Analyzer User Manual 243
Scenario Actions Teledyne LeCroy
 SnwTrain X 1
 DisparityError X 1
 10B Error X 1
 CrcError X 1
 Both Links Up X 1
 Link Speed 3G X 1
 Link Speed 6G X 1
 Link Speed 12G X 1
 Primitive Substitute X 12
 Insert Frame1 (Up To 1024 Dword) X 1
 Insert Dword8 (Up To 16 Dword) X 8
 SNW Manipulation X 16
 Global Action Register X 8
 State per sequencer X 256
 Action Register per state X 8
Usage of Action Register:
 Each Counter in Global Rules = 2
 Each Counter in State = 3
 Each Timer in Global Rules = 2
 Each Timer in State = 3
 Other Actions = 1
4.8.2 Using Counters in Events and Actions
Many of the events and actions supported by InFusion also support counters that can
control functions.
Within events, counters determine how many times the event must occur before the
associated actions are triggered. Event counters typically have two properties:
 Count Randomly: Can be set to “Yes” or “No” (default value is “No”). 
If set to “Yes”, the event repeats a random number of times (between 1 and the
value set in the property Max Random Count, which replaces the property
Counter Value when “Yes” is selected), before the action is triggered.
 Counter Value: Number of repeats required when Count Randomly is set to
“No”. The default value is 1.
Within actions, counters determine how many times the system calls the action before it
acts. Action counters typically have two properties:
 Random: Can be set to “Yes” or “No” (default value is “No”). 
If set to “Yes”, the action triggers a number of occurrences before the action
takes place. That number ranges randomly between 1 and the value set in the
property At least every Nth occurrence, which replaces the property
Every Nth occurrence when “Yes” is selected.
 Every Nth occurrence: Number of times the system calls the action before it
acts.