Teledyne LeCroy Sierra M122 User Manual - Manual (Page 114)

Teledyne LeCroy Project Settings
112 Sierra M122 SAS/SATA Protocol Analyzer User Manual
2.3 Project Settings
Prior to running the Advanced mode project, click the Settings tab. The options in the
Settings dialog are the same as for the Easy Mode, described starting on
page 96 .
SAS vs. SATA: For the ALIGN Transmission Period section, SATA Dialog shows options 256
and 258, and does not show 2048 or 2049.
For Speed, SATA Dialog shows H1, D1 to H4, D4 and does not show I1, T1 to I4, T4.
SATA Dialog does not show MUX Setting button.
2.3.1 Notes
To include some descriptive information about the project, click the Notes tab and enter
a brief descriptive note (see
“Add a Project Note” on page 103 ).