2 how to rename a loaded clip, How to rename a loaded clip, Ow to – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 97: Ename a, Oaded

Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
84
3. To save the clip, do one of the following:
• Click the New Clip icon.
• Press the ShuttlePRO dedicated button to save the
clip (see note below)
4. If the Save Clip window opens, fill in a clip name and any
desired information and click the Save button.
For more information on the Save Clip window, refer to
section 4.7 “Save Clip Window”, on page 52.
A green message will appear on the main window to inform you
that the clip has been created if this setting has been activated
in the Remote Installer.
Note
To save a clip from the ShuttlePRO, perform one of the
following actions :
• Use
to save a clip without.
• Use
+
to save a clip
and display the save clip window.
4.18.2 H
OW TO
R
ENAME A
L
OADED
C
LIP
To rename an existing clip in the Control Panel, proceed as
follows:
1. Load the clip in the Control Panel.
2. Right-click in a Control Panel pane.
The contextual menu is displayed.
3. Select the Rename option from the contextual menu.
The Update Clip Name dialog box opens.
4. Modify the clip name in the field.
5. Click OK.
The new name is automatically updated in the Control Panel.