5 play-list name and lsm id, Play-list name and lsm id, Ame and – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 79

Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
66
Function Description
When this option is selected, the following
message asks the users to confirm
whether they want to delete the play-list
or cancel the action:
“Are you sure you want to delete the play-
list (NAME_LSM ID)?”
For more information, refer to section
4.18.4 “How to Delete a Play-List in the
Clip-List Tab”, on page 85.
Set as Default
Play-List
Allows the users to set the loaded play-list
as default play-list.
Copy Clips
locally
Copies the clips of the loaded play-list to
the local XT, i.e. the XT of the controlled
channel.
The clips are physically copied to the local
XT and their new LSM ID is displayed in
the element list. The Status icon changes
from
to
.
4.11.5 P
LAY
-L
IST
N
AME AND
LSM
ID
The Name field displays the name of the play-list open in the
Clip-List tab. The play-list LSM ID (made up of the bank number
and position in the bank where the play-list is stored on the XT
server) is specified in the right field.
When the users know the play-list name or number, they can
enter the full name or number without slash in the corresponding
field and press ENTER.
For more information on the various ways to load a play-list,
refer to section 4.16.3 “How to Load a Play-List in the Clip-List
Note
When the users enter only two digits in the LSM ID
field, e.g. “2” and “5”, and press ENTER, the system
automatically load the local play-list 25/00 if it exists.