EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 184
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
Issue 4.3.C
171
If the setting is selected to display the on-air T/C of the current
element then the display will change as below to show the on-air
T/C:
If the parameter to display 3
r d
time information is unchecked in
the play-list settings, the following panels are displayed:
The ‘Times till transition’ information (cur and next) is calculated
taking into account the current speed. If the speed is zero, or
the play-list is in pause, the remaining time information will be
until the end of the play-list if it is played again from this point.
The ‘Time till next break’ information is also calculated taking
into account the current speed, and the transition information
(effect duration and play-list elements speed, if the speed is
unknown, the speed of the previous element will be used to
calculate the value, if this is also unknown, then the previous
elements speed must be used etc,).
Remaining time till the end of
the current element.
Remaining time till the next element starts. The
difference between the 2 values is the effect
duration
.
Remaining time till the next break in the play-list.
If the play-list has no break, the remaining time
till the end of the play-list is displayed.
Remaining time till the next element starts.