2 screen elements and functions, Device bar, Mode selector – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual
Page 27: Time code field, Preroll field, Screen elements and functions, Creen elements and functions
Issue 4.3.C
IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
14
3.3.2 S
CREEN ELEMENTS AND FUNCTIONS
The VTR Control Panel screen elements and functions are
described below.
D
EVICE BAR
The Device bar shows which device is linked to the VTR Control
Panel.
A different device can be selected by right-clicking the Device
bar and selecting the device in the list that appears.
M
ODE SELECTOR
The Mode selector
shows the current state of the window.
By clicking the top right button, the VTR Control Panel expands
to Auto-edit mode.
By clicking the bottom button, the VTR Control Panel expands to
Batch list mode.
T
IME CODE FIELD
The time code field shows the current position of the tape.
The tape can be cued to a defined timecode by entering a value
directly in this field and pressing [enter].
P
REROLL FIELD
The Preroll value defines how far the tape will rewind ahead of
the Mark IN point before it starts to play. This allows the VTR to
spin up and be at operating speed by the time the Mark IN is
reached. This preroll value may have to be adjusted in
consideration of the type of VTR being used.
The Preroll for the VTR value can be changed manually by
entering numbers in this field.