EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 107)

Issue 4.3.C IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment
94
4.20.2 H
OW TO
S
END A
C
LIP TO AN
E
XTERNAL
D
ESTINATION
It is possible to transfer a clip to several external destinations.
For more information, see section “Possible Transfers”, on page
61.
To send a clip to one of the possible destinations, proceed as
follows:
1. Load the clip in the Control Panel.
2. Right-click anywhere in the Control Panel (except in the
Linked to Clips list and in the Clip-List tab).
3. Select the requested destination from the contextual
menu.
The clip is sent to the requested destination. A new record is
added in the Clip Sent To list where you can see the transfer
status and access more information on the transfer via the
contextual menu.
For more information on the various destinations, refer to the
Database Explorer chapter.
4.20.3 H
OW TO
S
END A
P
LAY
-L
IST TO AN
E
XTERNAL
D
ESTINATION
It is possible to transfer a play-list to a destination target if the
destination target is set up to allow such transfer. For more
information, see the IP Director Technical Reference Manual.
To send a play-list to a destination target, proceed as follows:
1. Load the play-list in the Control Panel.
2. In the Clip-List tab, select Menu > Send to and the
requested destination, either default bin or destination
target.
The play-list is sent to the requested destination.