beautypg.com

10 ganged channels tab, 11 clip-list tab, Off-line and on-line play-lists – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual

Page 76: Ganged channels tab, Clip-list tab, 10 “ganged channels tab, 11 “clip-list tab

background image

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment

Issue 4.3.C

63

4.10 GANGED CHANNELS TAB

The Ganged Channels tab displays the information on all player
channels that have been ganged with the current channel under
the control of the active Control Panel.

The player in green is the one which is under the control of the
Control Panel.

This tab area also provides the following commands to use with
ganged channels:

How to Play a Ganged Channel, on page 96
How to Synchronise The Timecode on All Player Channels,

on page 96

How to Temporarily Ungang and Gang Again One or More

Channels, on page 96

How to Remove a Channel from the Group, on page 97

4.11 CLIP-LIST TAB

The Clip-List tab makes it possible to create simple play-lists
from the Control Panel. “Simple play-lists” means a list of clips
with the same transition applied between all elements. If you
want to utilize a more complex set of functions in your play-list,
use the Play-List Editor application in the IP Director suite:

The Clip-List tab also allows the users to play any existing play-
list stored on an XT, wherever it has been created.

Off-line and On-Line Play-Lists

The play-lists created in the Control Panel are directly defined
as on-line play-lists.

When the operators load an off-line play-list in the Clip-List tab,
it automatically becomes on-line, i.e. it is copied to the XT of the