EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 176)

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment Issue 4.3.C
163
6.8.4 L
OADING A
C
LIP ON THE
P
REVIEW
C
ONTROL
P
ANEL
A clip can be loaded on the preview channel by a drag and drop
operation from the mini-Database Explorer clip list or from the
clip list of the Database Explorer.
A clip can also be loaded by typing its name or LSM ID in the
corresponding fields of the preview control panel. If the no clip
corresponds to the text or LSM ID entered, no clip will be loaded
and the panel will remain in the previous state.
When a clip is successfully loaded IN, OUT, and duration
information is updated with the corresponding clip information.
B
ROWSE AND
R
EDEFINE
IN
AND
OUT P
OINT OF
THE
E
LEMENT
The operator can browse the clip between the limits of its
boundaries as displayed in the control panel. The marked ‘IN’
and ‘OUT’ points are shown by the lines between the yellow and
white areas, the yellow areas are the ‘guardbands’ which are
available to extend the clip if required, and the blue marker
indicates the current position within the clip.
The IN and OUT points of the clip can be defined using the panel
buttons:
The T/C position is grabbed into the Mark IN
field.
The T/C position is grabbed into the Mark
OUT field.
Clear IN The IN point is set at the first available frame
of the clip guardband and entered into the
Mark IN field.
Clear OUT The OUT point is set at the last available
frame of the clip guardband and entered into
the Mark OUT field.
The clip position moves to the value shown in
the Mark IN field.
The clip position moves to the value shown in
the Mark OUT field.