beautypg.com

Link video and audio parameters, Video effect and audio effect zones – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual

Page 151

background image

Issue 4.3.C

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out

EVS Broadcast Equipment

138

The values initially shown in the dialogue box are either the

values for the first selected element or the default values
defined in the play-list settings. For more information on play-list
default settings please refer to “Default A/V Effect Parameters
for Transitions” se
ction on page 173.

Link video and audio parameters

If this option is checked, any change made to a video parameter
will also be made to the corresponding audio parameter and vice
versa.

In the case where parameters are linked if wipe is selected in
the ‘video’ zone, a mix is automatically selected in the ‘Audio’

zone.

Video Effect and Audio Effect zones

Cut

The transition is defined as a cut (no effect)

Mix

The transition is defined as a mix (dissolve
effect)

Wipe

The transition is defined as a wipe effect. A wipe
type can be selected from the combo box.

Effect
duration

The combo box allows the selection of the
following items:

Customize: a popup window is opened

asking the operator to enter a specific
value.

Back to default: the duration is reset to the

default value defined in the default settings

• Three specific values: these values are

defined in the play-list settings in the Tools
menu area. Refer to the Predefined Effect
Duration
section on page 175 for more
information.