EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 188)

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment Issue 4.3.C
175
When On GPI is selected, the corresponding GPI, which has
been configured to start a PLAY command on the on-air
channel associated to the play-list tab, is displayed in the
description field.
• On Time, at: the element will start at the defined time. The
element will only be started if the element is on-air at the
specified time (independently of the date).
The element will start playing using the parameters defined in
the play-list relating to the element.
Note
If the Automatically option was selected when a start
mode is defined (Manually, on GPI, On Time, at), the
still mode will default to the ‘stop on Last frame of
previous clip’ mode.
6.9.4 P
LAY
-L
IST
– P
REDEFINED
V
ALUES
S
ETTINGS
P
REDEFINED
E
FFECT
D
URATION
This allows the pre-selection of three default values that can be
used when defining a custom effect value for an element in a
play-list.
These values are proposed in the combo box in the “define A/V
duration” for the transition, when on the Play-List Editor panel.
P
REDEFINED
A
UDIO
S
WAP
C
ONFIGURATION
This setting allows the user to set up common audio swap
configurations in advance to facilitate an efficient way of
changing configurations when building play-lists.
Common configurations can be made, named and added to a list
using this set-up area.
Once configurations have been defined they can be selected for
use using the Insert/Edit Tag command from the Play-List Editor
contextual menu. For more information on the use of Tags, see
section ‘Insert Tag’, on page 146.