Status bar, 4 vtr control panel mode 2: auto-edit mode, 1 purpose – EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual User Manual

Page 29: 2 screen elements and functions, Vtr control panel mode 2: auto-edit mode, Purpose, Screen elements and functions, Urpose, Creen elements and functions

Issue 4.3.C

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out

EVS Broadcast Equipment

Note

Some VTR devices may not support all the custom
speed values. When a custom speed is not available on
the VTR, the closest available speed will be used.

TATUS BAR

The status bar shows the current status of the VTR Control
Panel.

3.4 VTR CONTROL PANEL MODE 2:

AUTO-EDIT MODE

3.4.1 P

URPOSE

In Auto-edit Mode

, a single clip can be digitized from the

VTR to a record channel on an XT server. In the auto-edit
process, clips can be sent to different destinations and published
to user groups.

3.4.2 S

CREEN ELEMENTS AND FUNCTIONS

The Transport Mode buttons and controls remain the same in

Auto-Edit Mode. Refer to section 3.3 “VTR Control Panel Mode
1: Transport Mode”, on page 13 for details.

The extra fields and buttons for Auto-Edit Mode are explained
below.