EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 82)

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment Issue 4.3.C
69
The transition type is only available for effects other than “cut”.
By default, the transition duration is 00s00, hence no transition
is applied.
You can modify the value in two possible ways:
• Select the whole value and enter 4 digits following the
pattern 00s00: 2 digits for seconds, 2 digits for frames.
• Select only the 2 digits for the seconds or the 2 digits for the
frames and only modify this part of the value.
4.11.7 E
LEMENT
L
IST
The list of clips included in the play-list is displayed in the
Element List area.
F
IELD
D
ESCRIPTION
The following table describes briefly the various fields available:
Field Name Description
T/C IN Time code of the IN point of the play-list
element.
Status Indication whether the element is local (on
the XT) or distant:
Local element
Distant element
Invalid distant element (i.e. if
the XT server is not
connected to the XNet
network)
Name Element name
Duration Duration of the element (excluding the
guardbands).
LSM ID LSM ID of the clip or train name