EVS IPDirector Version 4.3 - October 2007 Part 3 User's Manual - Manual (Page 154)

IP Director Version 4.3 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment Issue 4.3.C
141
trigger is received on the corresponding XT server (the one
the play-list is to be played on). The GPI number and its
trigger mode are defined in the general settings, GPI section.
When On GPI is selected, the corresponding GPI, which has
been configured to start a PLAY command on the on-air channel
associated to the play-list tab, is displayed in the description
field.
If no GPI has been configured to start a PLAY on the on-air
channel, a warning message is displayed in RED in the
description field.
If no on-air channel is defined, a warning message is displayed
in RED in the description field:
• On Time, at: the selected element will start at
the defined time. The element will only be started if the
element is on-air at the specified time (independently of the
date).
The element will start playing using the parameters defined in
the play-list relating to the element.
Note
If Automatically was selected when a start mode is
defined (Manually, on GPI, On Time, at), the still mode
will default to the ‘stop on Last frame of previous clip’
mode.
Manual Override on Start mode settings
If the start mode has been defined On GPI, or On Time, at, it is
still possible to manually start the element by pressing PLAY.
R
ESET TRANSITION TO DEFAULT
When the Reset transition to default is selected from the menu,
all transitions parameters (speed, still mode, start mode, A/V
effect) are reset to the default values specified in the menu
Tools > Settings > Play-List > Pre-defined Values. For more
information refer to “Play-List – Predefined Values”, on page
175.